Flowcheck LLC

FAQ

Flowcheck FAQs

Sprinkler and backflow questions, answered straight

47 answers on backflow testing, winterization, repairs, and new installs around the Portland metro area, in our owner's own words.

$60Residential backflow test, 2026 pricing
5 to 10 minTypical backflow test. No need to be home
50 yrsCombined irrigation experience on our team
1 yearWarranty on new irrigation installs
Showing all 47 answers

Backflow Testing

A backflow device is a plumbing device, usually in the ground, hooked on at the beginning of your irrigation system. It makes sure the water only goes in one direction. It has two check valves that close tight.

A backflow test is us checking that those valves are doing their job, so irrigation water can't get pulled back into the drinking water.

It has to be tested once a year per Oregon Health Authority requirements. We test the devices and submit the results to the water districts. Then in March every year, the water districts submit their reports to the Oregon Health Authority.

Contact Flowcheck. You can go on our site or you can call us. We'll get your assembly information either from you or from the water district, and then we'll schedule one of our techs to come out, usually within the next 30 days depending on your due date.

We take care of everything from there:

  • We run the test
  • We send you a copy of the report
  • We electronically submit it to your water purveyor at no additional charge

If you don't get it tested every year, the water districts have the authority to shut off the water to your house. It's a lot easier to just get the test done.

For a residential backflow test, it normally costs around $60 per test (2026 pricing). That includes submitting the results to your water district.

For commercial, we just ask that you email us or call for pricing.

It depends on the condition of the device, but normally it takes around five to 10 minutes per test.

No. As long as the device is outside or behind an unlocked gate, you do not need to be present for the test.

We always leave a door hanger once the test is complete to let you know the status: whether it passed or failed, or if there's other action we need to take. For devices that require an appointment, we'll contact you to set up a time window.

If a device fails, we don't repair it on the same visit. We always provide a quote for the repair first.

For a residential repair, it's normally between $250 and $350 (2026 pricing). That includes the parts, the retest, which we don't charge extra for, and resubmitting the passing results to the water district.

Yes, we offer HOA discounts. We have a few requirements:

  • A minimum of 10 houses
  • One point of contact
  • One check for the entire amount

We don't individually bill the residents for the HOA. It just goes to the one point of contact.

Yes. For commercial, we just want you to either email us or call for pricing.

Maintenance Plans

It's a prepaid annual plan that covers the routine service your irrigation system needs. We have three tiers: Bronze, Silver, and Gold. The plans run from January to December and they're only available to residential clients.

It's kind of like doing oil changes on your car. You just have to do it. An irrigation system is the same thing. You can't just put it in the ground and forget about it for 30 years. It has to be maintained every year.

  • Bronze includes the spring startup and the winterization
  • Silver, which is our most popular, includes the spring startup, the yearly backflow test, and the winterization. Those are the three basic things everyone who has an irrigation system needs
  • Gold is the same as Silver. It just includes a mid-season check to make sure everything's working correctly

With Silver and Gold, you also get 10% off any repairs we find for the entire year.

Two of our three maintenance plans include a backflow test: the Silver and the Gold. The Bronze plan covers the spring startup and winterization only.

We have two ways you can sign up.

Manual renewal runs January to December and closes out in December.

Our more popular option is automatic renewal, so you kind of set it and forget it. It runs January through December the same way. We send a reminder email in December that you're going to get billed, a credit card is required, and we bill all the auto renewals on January 15 each year.

Basically anyone in the Portland area that has an irrigation system. We recommend one of the maintenance plans because the startup, the backflow test, and the winterization are things every system needs each year anyway. On Silver or Gold you also get 10% off any repairs we find that year.

Winterization and Spring Startup

Yes, we highly recommend everyone who has an irrigation system winterize it each year.

Sometimes there are pipes above ground, like standpipes, or sprinkler heads that sit above ground. If it's not drained out properly, that water stays in the pipe over the winter, and if we get an overnight freeze, it will crack. We've seen that happen before.

For 2026, our manual drain costs $80 as a single service. The blowout is $140.

Most people in Portland can just have their systems manually drained, and it won't freeze on them. That's what we do for most of our clients.

For systems at higher elevations, or ones with standpipes above ground or pipe that's exposed to the elements, we recommend blowing out the system.

We recommend you start booking in September. We begin winterizations the middle of October and they run through about the middle to end of November.

We recommend starting to book with us in February. We start those the middle of March, and it usually runs through the end of April and into May a little bit.

It's a very comprehensive exam of the system. It usually takes about 45 minutes to an hour, and it includes:

  • Closing any open drain valves
  • Inspecting all the valves, including the electronic valves
  • Activating the water to the system
  • Running every zone and walking it to check each head individually
  • Checking all the drip lines
  • Looking for leaks, proper coverage, and things like clogged nozzles

If a nozzle is clogged up, we'll go ahead and replace it. We include up to about $25 in parts for free as part of the startup, which covers things like nozzles, a rotor, or a few sprinkler heads if needed.

Not if you book the spring startup only. The backflow test is a separate service. If you want both together, the Silver and Gold maintenance plans include the startup, the backflow test, and the winterization.

Repairs

There are three we see the most:

  • Leaks or line breaks. You can see water flooding out in your yard when you run a certain zone. Sometimes it's a broken pipe, sometimes it's a head that needs replaced
  • A weeping valve. Water trickles out of the lowest head hours after the zone ran
  • Electrical issues. You have five zones and all of a sudden zone three quits working

We come out, diagnose what the issue is, and repair it on site.

This one gets diagnosed improperly a lot. Say you run a zone in the morning, and that evening you notice water weeping out of one of the heads. It's usually the lowest head, elevation wise, and the zone hasn't run for about 10 hours.

A lot of people think the head is the problem. It's actually what we call a weeping valve. It means one of the valves has debris in it, or the diaphragm has gone bad. We can come out, diagnose it, and replace the valve.

That's usually an electrical issue, which is more of an advanced service. We come out and hook up our multimeter at the clock to check where the wiring issue is. We can trace the wire to see if it got cut somewhere. It could be a bad solenoid. It could be several things, but we diagnose what the issue is and then repair it on site.

We charge $195 for our service call fee (2026 pricing). It includes the first hour. Parts are additional, and anything beyond the first hour is charged at our $125 an hour rate plus parts.

Most repairs we see can be resolved within the first hour.

Call us right away or book with us online.

Any pictures or additional information you can provide helps before our tech comes out, so we know what we're looking for. If you can flag where the issue is, or just tell us if it's in the front yard or backyard, that helps quite a bit. It ends up saving you money because we're not having to hunt around. We can go right to the problem and deal with it directly.

In peak season it's about two to three weeks, usually two weeks out. Our crews are working Monday through Saturday during peak season, so we're pretty swamped, but we do everything we can to get out as quick as possible.

All of our techs are visible on a map. If someone calls in and needs a repair right away, one of our office admins can open the map, see who's nearby, and possibly fit you in.

Here's a recent one. A client reported that one of his backyard lawn zones wasn't working. I went out, checked the electrical, and there was no signal to the zone, so half of his lawn wasn't getting watered.

The valve was about 30 years old, which is a really good run for plastic and aluminum. He had two valves in back, so I replaced both of them because they're right there. As I was digging it out, I found a leak under the bed that he didn't even know about, so I kept digging, found the source, and repaired that too.

He also wanted his clock replaced with a Wi-Fi unit and a rain sensor. Now he can run his whole system from his phone.

Installs and Upgrades

We generally price it by zone. Most residential houses are around four to six zones, and each zone is about $1,650 to $1,700 (2026 pricing).

So a typical four to six zone yard works out to roughly $6,600 to $10,200.

The per zone price includes:

  • A brand new backflow preventer, which is a plumbing code requirement
  • The permit to install the backflow preventer
  • All the parts
  • All the labor
  • All the equipment rental and the fuel to run the equipment

Yes. A system extension is lower per zone than a new install, but it depends on the current state of the system. If we can reuse a lot of the piping and the valves that are currently there, we'll reuse them.

I tend to go with the mindset: if it ain't broke, don't fix it. So I try to reuse as much of the client's current system as possible. But if it's 30 years old, we're more than likely going to replace quite a bit of it.

  • The site visit is free. Our estimator comes out and walks the site with you. It usually takes about an hour
  • You tell us what you're looking for and what you want to get watered. We'll ask if you want a Wi-Fi enabled clock
  • Within a week of the site assessment, we send you the quote. It includes all the labor and all the materials
  • We require a 50% deposit, and once you approve the quote, we book it

Your estimator will let you know how far out we are.

Most new installs take about five days. We plan for a full week.

As far as scheduling, we're typically about two months out. In the middle of the summer we can be three to four months out.

Fall is a great time to do it, especially October and early November. Sometimes the rains haven't hit by then, but the plants have gone more dormant, so it's easier to work around them.

The toughest time for us to book is the middle of March through April, because we're doing a lot of startups and new installs are multi-day jobs. But we do them year round, and we'll definitely get you on the books.

It covers any defective parts and fittings, and it covers leaks.

It's really rare that a leak will happen from one of our new installs. But occasionally a pipe will have a hairline crack in it from being damaged at the vendor, by a forklift or something like that. Those are hard to see. We'll come back and repair them.

We used to do a lot of drip installs and found that it's very maintenance heavy. It's a great concept, but drip is the number one thing we repair during spring startups. It sits on top of the ground, so it's exposed. We've had squirrels, raccoons, and dogs chew up the tubing. We've seen everything.

Spray heads, for the most part, are pretty bulletproof compared to drip, so we've been doing a lot of drip to spray head conversions.

We still use drip in three places:

  • Raised garden beds, because it's pretty well protected in the box
  • Really narrow planter beds, less than a foot wide, where spray heads would overspray
  • Potted plants on a patio or deck, because that's really the only thing you can use to water those

Yes. We can install a Wi-Fi enabled clock so you can run the whole system from your phone. We ask about it on every new install, and we can also swap one in on an existing system, along with a rain sensor.

We haven't worked directly with developers on new installs as of yet. Builders will hire us for things like a new backflow install.

Real estate agents will have us go out and inspect a house, run a thorough investigation of the sprinkler system, and report our findings back.

Leaks and High Water Bills

Normally, yes. It could be several things. It could be a valve that's letting water get past it and dripping out of one of the heads. It could be a leak in a line. We've seen root damage too.

The number one thing we recommend is to go check your water meter with no water being used in the house and no irrigation system running.

If you see the dial moving at all, it means you have an active leak somewhere. That's when you need to have a leak detection company come in.

It depends on where the leak is.

Right now we refer clients out to a leak detection company to locate it. Most leak detection companies will not do the repairs, so once the leak is found, we ask clients to call us back.

If it's in the irrigation system, we can do the repairs because we're licensed for that. If it's on the domestic water line to the house, a licensed plumber has to be hired for that.

Yes, and we always ask about it when we come out for a leak. If a fence was put in, a lot of times a post gets pushed right through the pipe. Recent concrete work can damage it too.

We had a client in Forest Grove who had a brand new sports court put in his backyard. The contractor was just doing their job, but they really damaged the irrigation and cut the wire. We had to run all new wire through his crawl space and all new piping for his backyard zones.

About Flowcheck

We serve all of Washington County, most of Columbia County, and much of the Portland metro area, down to Oregon City. In Yamhill County we go as far as Newberg and Yamhill, but not beyond that. We don't go to Dundee or McMinnville.

Our service area includes Aloha, Banks, Beaverton, Bull Mountain, Cedar Hills, Cornelius, Farmington, Forest Grove, Gaston, Hazeldale, Helvetia, Hillsboro, Hillsdale, King City, Lake Oswego, Milwaukie, Newberg, North Plains, Northwest Portland, Oak Hills, Oregon City, Rock Creek, Scappoose, Scholls, Sherwood, Southwest Portland, St. Helens, Tigard, Tualatin, West Hills, West Linn, West Portland, West Union, and Yamhill.

We recommend our online booking. You just go to our website and you can see all of our services there. We always welcome phone calls, but most of our clients book through the website.

Our maintenance plans and our backflow testing prices are listed on the site. We're very upfront with our pricing. We don't hide anything.

Customers pick Flowcheck because of our reliability and how responsive we are. When you call in, we answer the phones. We actually return phone calls.

Between our irrigation manager, myself, and our techs, we have about 50 years of combined knowledge in the irrigation industry. Everyone is very customer service oriented and we all share a common goal: getting everyone's irrigation system to work correctly and efficiently.

That saves our customers money in the long run. If an irrigation system isn't attended to, the water bill will just keep going up. We take care of all that.

I used to work for a family member who had a landscaping company for about 40 years, and he advised me to get into backflow testing. I had a full time job, so I was doing backflow testing on the side, at nights and on the weekends.

One of my clients in Hillsboro asked if I knew anything about irrigation systems. I had put in my own system at my previous house, so of course I said yes. He had me fix it and was really happy with the results, so he referred me to a neighbor two houses down. That neighbor hired me, and the irrigation side basically spread by word of mouth from there.

Irrigation and backflow terms, defined

24 plain-language definitions. Dotted terms inside the answers above show these same definitions when you hover or tap.

Backflow
When water flows backward from a property's plumbing or irrigation system into the public drinking water supply.
Backflow device
A plumbing device at the start of an irrigation system that keeps water moving in one direction only. Also called a backflow preventer or backflow assembly.
Blowout
A winterization method that uses compressed air to push the remaining water out of the lines.
Check valve
A one-way valve inside a backflow device. It closes tight so water can't reverse direction.
Controller (clock)
The timer that tells each zone when to run and for how long. Wi-Fi models can be run from a phone.
Diaphragm
The rubber seal inside a valve that opens and closes to control water flow.
Drip irrigation
Tubing that sits on top of the ground and delivers water slowly, right at the base of plants.
Leak detection
A specialized service that pinpoints where an underground water leak is located.
Manual drain
A winterization method where the system's drain valves are opened so the water drains out on its own.
Mid-season check
A summer visit, included in the Gold plan, to make sure the system is still working correctly.
Multimeter
An electrical testing tool used to find wiring faults between the controller and the valves.
Nozzle
The tip on a sprinkler head that shapes the spray pattern. Nozzles can clog with debris.
Oregon Health Authority
The state agency whose requirements call for backflow devices to be tested once a year.
Rain sensor
A device that pauses scheduled watering when it rains.
Rotor
A sprinkler head that rotates a stream of water across a larger area.
Solenoid
The small electric part on a valve that opens it when the controller sends a signal.
Spray head
A sprinkler head that pops up and sprays a fixed fan of water over a small to medium area.
Spring startup
The spring service where the system is turned back on and every zone and head is inspected.
Standpipe
A vertical pipe that sits above ground, which makes it more exposed to freezing.
Valve
The electronically controlled valve that opens to send water to a single zone.
Water purveyor
The city or water district that supplies your water and tracks your annual backflow test.
Weeping valve
A valve that doesn't fully close, so water trickles out of the lowest head long after the zone has run.
Winterization
Draining the water out of an irrigation system before winter so pipes and heads don't crack in a freeze.
Zone
A group of sprinkler heads or drip lines that run together off one valve.

Still have a question?

"When you call in, we answer the phones. We actually return phone calls. And we're very upfront with our pricing. We don't hide anything."

Answered by Rob JonesOwner, Flowcheck LLC

Prices shown are 2026 pricing and subject to change. Flowcheck LLC, Hillsboro, Oregon. LCB# 9331.

Scroll to Top